Feather
One Gel Magnetic
Light as a what? A rich 1-step shimmery white pink gel nail polish that delivers a flawless all-in-one base, color/effects, and topcoat for a salon gel shine that lasts up to 14 days. Easily removes with our One Gel Magic Off Remover Kit, sold separately.
How to Apply
How to Remove
• Rich 1-step color with pro-level effects.
• Flawless coverage.
• Shine that lasts.
• No base or top coat needed.
• Damage-free, bubble-off removal.
• Power Magnet: superior magnetic pull for effortless effects.
• Cruelty free, 21 free, vegan.
Di-HEMA Trimethylhexyl Dicarbamate, Isopropylidenediphenyl Bisoxyhydroxypropyl Acrylate, Acrylates Copolymer, Diethylenegycol Dimethacrylate, Trimethylbenzoyl Diphenylphosphine Oxide, Polysilicone-11. May Contain: Titanium Dioxide, CI 77499, Pigment Violet 23, CI 15850, CI 11680, CI 77007, Basic Red 1, Basic Violet 10, Quartz, Chromium, Iron Powder, Nickel, Polyethylene Terephthalate, Polyurethane 33, Aluminum, Synthetic Fluorphlogopite, Tin Oxide
1 10mL / .33 oz one gel polish
How To Apply One Gel Magnetic
Step 1
PREP
Clean nails with soap and water.
Trim or file nails to desired length and shape.
Push back cuticles.
Lightly buff nail beds using a buffer to remove natural shine and create subtle texture.
Remove any oils and residue from nails using alcohol and let dry.
If you have split, bent, or chipped nails: Gently file to smooth and reshape. Trim off damaged area of nail, if possible, to maximize wear. Then continue with prep steps to ensure proper adhesion of the polish.
Step 2
APPLY
Shake bottle well to mix up magnetic particles.
Apply one coat of polish to one nail*.
*Effects must be activated and cured before moving onto the next nail.
PRO TIP: Make sure to cap your free edge with polish for longer-lasting wear.
Step 3
ADD EFFECT
Hover the flat side of the magnet about 1 inch away from your nail, slightly moving side to side along either the left or right side of your nail bed.
Once desired effect is created, repeat on the other side of the nail bed.
To finish, hover the magnet at the free edge of your nail bed, completing a classic velvet effect.*
*If desired outcome is not achieved or a mistake is made, run the brush over polish to reset magnetic particles.
PRO TIP: Avoid getting polish on the cuticle or skin; remove any polish or pooling between nail and skin before curing.
PRO TIP: For a more intense magnetic effect, apply an ultra-thin first coat (do not use the Power Magnet Tool), cure, then apply a second coat following the above instructions.
PRO TIP: Make sure to cap your free edge with polish for longer-lasting wear.
Step 4
CURE
After each nail, complete the following:
Press button on the back of lamp to activate LED light.
Cure for 60 seconds. Lamp will automatically turn off after 60 seconds.
PRO TIP: To ensure proper curing, please use the One Gel LED Lamp. One Gel is not compatible with the Dashing Diva Glaze Lamp.
NOTE: SmartShield technology allows you to safely connect USB-C to ANY power source – and can also cause your LED lamp to blink. Don’t worry, nothing is wrong. This is just the SmartShield doing its job.
OPTIONAL STEP: Apply & cure Dashing Diva One Gel Top Coat for extra shine.