STEP 1: PREP
Clean nails with soap and water.
Shape nails and push back cuticles using manicure stick.
Lightly buff nail beds with a buffer to remove natural shine and create subtle texture.
Wipe nails with alcohol to ensure nail beds are clear from oils/residue.
Make sure nails are completely dry before application.
STEP 2 OPTION 1: APPLY ONE GEL
Shake bottle well before use.
Pick up a small amount of polish on the brush and apply one ultra-thin coat of gel to nails, starting from the middle of the nail bed.
Using the One Gel Lamp*, cure the polish for 60 seconds.
Apply a second coat of gel polish to nails, then cure.
For desired opacity, apply a third coat.
PRO TIP: Curing results may vary if an LED lamp from another brand is used with One Gel.
STEP 2 OPTION 2: APPLY GEL
Apply any gel base coat and gel color according to specific product instructions.
STEP 3 OPTION 1: APPLY ONE GEL TOP COAT
Apply a thin coat of One Gel Top Coat and cure for 60 seconds using the One Gel Lamp.
STEP 3 OPTION 2: APPLY TOPCOAT
Apply any gel topcoat and cure according to specific product instructions.
NOTE: Chrome powder will not adhere well if topcoat is not applied and cured properly.
STEP 4: APPLY CHROME
Using the included powder applicator, firmly rub an ample amount of the powder all over the nail bed until there is an even chrome shine on the nail.
Dust off any excess chrome powder.
STEP 5 OPTION 1: SEAL WITH ONE GEL TOP COAT
Apply a thin layer of One Gel Top Coat over the chrome powder and cure for 60 seconds using the One Gel Lamp.
STEP 5 OPTION 2: SEAL WITH GEL TOPCOAT
Apply a thin layer of gel topcoat over the chrome powder and cure according to specific directions.
PRO TIP: For optimal adhesion, avoid exposing nails to lotions, oils, or water for at least one hour after application.
